Brisbane Domestic to International

1. Disembark the aircraft into the Domestic Terminal, and proceed to ground floor and walk outside the terminal.

2. You can transfer to the international terminal using either the Airtrain service or the T-Bus InterTerminal shuttle – follow signage as appropriate.

3. Hand your transport pass to the T-Bus or Airtrain attendant.

4. Alight the bus at International terminal. If you already have your international boarding pass proceed to Security. Otherwise, go to the check in counter of the airline operating your international flight. (refer to airport information screens for check-in location).

A map of Brisbane Domestic Airport illustrating the route for transferring to the International terminal, featuring clear pathways and key landmarks.

Brisbane International to Domestic

1. On arrival, collect your bags from the carousel and clear Customs and Quarantine.

2. After entering the Arrivals Hall, turn right and proceed to the far wall to the Domestic Transfer Desk to check in your bags for your domestic flight & collect your complimentary transfer pass.

3. You can transfer to the domestic terminal using either the Airtrain service or the T-Bus Inter-Terminal shuttle – follow signage as appropriate.

4. Upon arriving at the Domestic Terminal, make your way to your departure gate.

A map of Brisbane International Airport illustrating the route for transferring to the Domestic terminal, featuring clear pathways and key landmarks.

Melbourne Domestic to International

1. Disembark the aircraft into either the T3 or T4 Domestic Terminal.

2. Follow signs to the International Terminal (T2).

3. Please exit the arrivals hall and make your way up to the international check-in area.

4. If you are already holding a boarding pass for your international flight, proceed to Departures. Otherwise, go to the check-in counter of the airline operating your international flight (refer to airport information screens for check-in locations).

5. For Airport maps, please refer to Melbourne Airport.

A map of Melbourne Domestic Airport illustrating the route for transferring from Virgin Australia terminal to the International terminal, featuring clear pathways and key landmarks.

Melbourne International to Domestic

1. On arrival, you must collect your bags from the baggage carousel prior to clearing Customs and Quarantine.

2. After exiting into the Arrivals Hall turn right, proceed up the escalators and follow signs to the T3 Virgin Australia Domestic Terminal.

3. If you are already holding a boarding pass for your domestic flight, proceed to the bag drop queue. Otherwise, please join the check-in queue.

4. Proceed through security screening and make your way to your departure gate.

5. For Airport maps, please refer to Melbourne Airport.

A map of Melbourne International Airport illustrating the route for transferring from International terminal to Virgin Australia Domestic Airport terminal, featuring clear pathways and key landmarks.

Perth Domestic to International

1. Disembark the aircraft into the T1 Domestic Terminal.

2. Proceed along the concourse and down the escalators into the arrivals hall.

3. Upon exiting the arrivals hall, turn left and follow terminal signs to International check-in.

4. If you are already holding a boarding pass for your international flight, proceed directly to Security, otherwise, please go to the check-in counter of the airline operating your onward flight.

 

(N.B. Refer to airport information screens for check-in location).

A map of Perth Domestic Airport illustrating the route for transferring to the International terminal, featuring clear pathways and key landmarks.

Perth International to Domestic

1. Clear Customs and Immigration. Collect your baggage from the baggage carousel and proceed to quarantine inspection.

2. Exit into the arrivals hall, and please check your itinerary to determine if your onward flight is departing from Terminal 1 or Terminal 2.

3.  For flights departing from Terminal 1, turn right while in the international arrivals hall and follow terminal signs to Domestic check-in hall, please see a Virgin Australia team member for assistance.

4.  For flights departing from Terminal 2, exit the International Terminal, turn right and follow airport signs to Terminal 2. Upon entry into the terminal, please see a Virgin Australia team member for assistance.

A map of Perth International Airport illustrating the route for transferring to the Domestic terminal, featuring clear pathways and key landmarks.

Sydney Domestic to International

1. Disembark the aircraft into the domestic terminal (T2), and exit the terminal on the arrivals level.

2. Proceed to the T-Bus departure point. It's located directly outside the terminal, on the arrivals level.

3. The T-Bus is a free transfer service between terminals.

4.  Once you arrive at the international terminal (T1), head inside to check in or through to security.

A map of Sydney Domestic Airport illustrating the route for transferring to the International terminal, featuring clear pathways and key landmarks.

Sydney International to Domestic

1. On arrival, collect your bags from the carousel and clear customs and quarantine..

2. Follow the signs to the Virgin Australia transfer desk, located in the Arrivals Hall. Here, you can check-in for your Virgin Australia domestic flight and drop your baggage.

3.  Make your way to the exit, following the marked signs to the T-Bus pick-up point. Proceed on the T-Bus to the domestic terminal (T2).

4.  Once you arrive at the domestic terminal, head through Security before making your way to your departure gate.

A map of Sydney International Airport illustrating the route for transferring to the Domestic terminal, featuring clear pathways and key landmarks.

Cairns Domestic to International

1. Disembark the aircraft into the domestic terminal and follow the exit signs to walk outside the terminal.

2. Once outside, follow the signs to the International Terminal via the undercover walkway

3. If you are already holding a boarding pass for your international flight proceed directly upstairs to departures and through security and immigration. If you are not holding a boarding pass, please go to the check-in counter of the airline operating your international flight.

4. For airport maps, please refer to Maps»Cairns Airport

Cairns International to Domestic

1. Upon arrival, clear immigration and collect your baggage from the baggage carousel. Proceed through customs / quarantine inspection.

2. Exit into the arrivals hall and follow the signs to the Domestic Terminal via the undercover walkway.

3. Upon arrival at the domestic terminal, if you are already holding a boarding pass for your domestic flight, proceed to the bag drop queue. Otherwise, please join the check-in queue..

4. Proceed through security screening and make your way to the departure gate.

5. For airport maps, please refer to Maps»Cairns Airport